View QPC7336_9122405.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

QPC7336 45mhz to 1218mhz variable equalizer data sheet rev. e, apr 25, 2019 | subject to change without notice 1 of 13 www.qorvo.com ? product description the qp c7336 is a voltage controlled variable equalizer employing soi attenuator , op timized for docsis 3.1 operation between 45mhz and 1218mhz . 14 pin, 6 .0 mm x 6.0 mm x 1.375 mm package product features ? 45 ? 1218 mhz operational bandwidth ? 21 db slope range ? low insertion loss ? high linearity ? 75ohm impedance for catv applications ? 5v single supply voltage ? low power consumption applications catv amplifier and transmission systems functional block diagram ordering information part no. description QPC7336sb sample bag 5 pcs QPC7336sq sample bag 25 pcs QPC7336sr 7? reel with 100 pcs QPC7336tr7 7? reel with 500 pcs QPC7336 tr13 13? reel with 1000 pcs QPC7336pcba - 41 0 fully assembled e valuation board output vdd slope control qpc 7336 filter input 180 downloaded from: http:///
QPC7336 data sheet rev. e, apr 25, 2019 | subject to change without notice 2 of 13 www.qorvo.com ? recommended operating conditions parameter min typ max units supply voltage (vdd) +5 v junction temperature +125 c operating temperature -30 + 100 c electrical specifications are measured at specified test conditions in application circuit. specifications are not guaranteed over all recommended operating conditions. absolute maximum ratings parameter value?/?range supply voltage (vdd) - 0.5 to +6v control voltage (vc) - 0.5 to +6v control voltage 2 (vc2) - 2 to +24v mode - 0.5 to +6v storage temperature ?40 to 100?c rf input power +30 dbm exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum rating conditions to the device may reduce device reliability. electrical specifications C tested in evaluation c ircuit parameter conditions (vdd=5v, t mb =25c, z s =z l =75 ? ) min typ max units general performance supply current (i dd ) 2 ma thermal resistance 70 k/w rf input power 27 dbm frequency range 45 1218 mhz minimum slope [1] f= 45 to 1218mhz 0.6 db maximum slope [1] f= 45 to 1218mhz 22 db rf performance , slope set between 5db and 15db insertion loss (s21) f= 1218mhz 2.75 3.0 db flatness [2] f= 45 to 1218mhz 0.6 db input return loss (s11) - 16 db output return loss (s22) - 16 db input ip3 p in + (im3 dbc /2) 6mhz tone spacing at 15 dbm/tone 50 dbm input ip2 p in + im2 dbc , im2 is f1 + f2 6mhz tone spacing at 15 dbm/tone 80 dbm rf performance , slope set between 1db and 22db insertion loss (s21) f= 1218mhz 3.0 db flatness [2] f= 45 to 1218mhz 2.8 db input return loss (s11) - 15 db output return loss (s22) - 16 db downloaded from: http:///
QPC7336 data sheet rev. e, apr 25, 2019 | subject to change without notice 3 of 13 www.qorvo.com ? parameter conditions (vdd=5v, t mb =25c, z s =z l =75 ? ) min typ max units control control voltage (vc) [3], positive slope control gradient mode = 0v, minimum slope at vc = 0v 0 1 to 3 5 v control voltage (vc) [3], negative slope control gradient mode = 5v, minimum slope at vc = 5v 0 2 to 4 5 v control voltage 2 (vc2) [3], positive slope control gradient mode = 0v, minimum slope at vc2 = 0v 0 4 to 1 2 20 v control voltage 2 (vc2) [3], negative slope control gradient mode = 5v, minimum slope at vc2 = 20v 0 8 to 1 6 20 v mode pin logic low 0.4 v mode pin logic high 1 v notes: 1. s lope is defined as the difference between the gain at the start frequency and the gain at the stop frequency. 2. flatness is defined as sum of positive and negative deviation from a straight line between gain at s tart frequency and gain at stop frequency. 3. either vc or vc2 can be used to set slope, internal 1:4 voltage divider between vc and vc2. QPC7336 slope vs. frequency, typical -30 -25 -20 -15 -10 -5 0 0 200 400 600 800 1000 1200 1400 s21 [db] frequency [mhz] 0.6db 1db 2db 3db 4db 5db 6db 7db 8db 9db 10db 11db 12db 13db 14db 15db 16db 17db 18db 19db 20db 21db 22db downloaded from: http:///
QPC7336 data sheet rev. e, apr 25, 2019 | subject to change without notice 4 of 13 www.qorvo.com ? QPC7336 input ip3 vs. slope, typical QPC7336 flatness vs. s lope, typical 40 45 50 55 60 0 5 10 15 20 input ip3 [dbm] slope [db] 50 mhz 200 mhz 400 mhz 600 mhz 800 mhz 1000 mhz 1200 mhz -1,0 -0,8 -0,6 -0,4 -0,2 0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,2 2,4 2,6 2,8 3,0 0 200 400 600 800 1000 1200 1400 flatness (linear) [db] frequency [mhz] 0.6db 1db 2db 3db 4db 5db 6db 7db 8db 9db 10db 11db 12db 13db 14db 15db 16db 17db 18db 19db 20db 21db 22db downloaded from: http:///
QPC7336 data sheet rev. e, apr 25, 2019 | subject to change without notice 5 of 13 www.qorvo.com ? QPC7336 s11 vs. s lope, typical QPC7336 s22 vs. s lope, typical -30 -25 -20 -15 -10 -5 0 0 200 400 600 800 1000 1200 1400 s11 [db] frequency [mhz] 0.6db 1db 2db 3db 4db 5db 6db 7db 8db 9db 10db 11db 12db 13db 14db 15db 16db 17db 18db 19db 20db 21db 22db -30 -25 -20 -15 -10 -5 0 0 200 400 600 800 1000 1200 1400 s22 [db] frequency [mhz] 0.6db 1db 2db 3db 4db 5db 6db 7db 8db 9db 10db 11db 12db 13db 14db 15db 16db 17db 18db 19db 20db 21db 22db downloaded from: http:///
QPC7336 data sheet rev. e, apr 25, 2019 | subject to change without notice 6 of 13 www.qorvo.com ? QPC7336 slope vs. vc, typical QPC7336 slope vs. vc2, typical 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 vc [v] slope [db] vc [v] @ mode = 0v vc [v] @ mode = 5v 0,0 2,0 4,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 vc2 [v] slope [db] vc2 [v] @ mode = 0v vc2 [v] @ mode = 5v downloaded from: http:///
QPC7336 data sheet rev. e, apr 25, 2019 | subject to change without notice 7 of 13 www.qorvo.com ? QPC7336 slope vs. temperature, typical QPC7336 input ip3 vs. temperature, typical -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 0 200 400 600 800 1000 1200 1400 s21 [db] frequency [mhz] 5db slope, -30c 5db slope, +25c 5db slope, +100c 10db slope, -30c 10db slope, +25c 10db slope, +100c 15db slope, -30c 15db slope, +25c 15db slope, +100c 40 45 50 55 60 5 6 7 8 9 10 11 12 13 14 15 input ip3 [dbm] slope [db] 50 mhz, -30c 50 mhz, +25c 50 mhz, +100c 600 mhz, -30c 600 mhz, +25c 600 mhz, +100c 1200 mhz, -30c 1200 mhz, +25c 1200 mhz, +100c 40 45 50 55 60 5 6 7 8 9 10 11 12 13 14 15 input ip3 [dbm] slope [db] 50 mhz, -30c 50 mhz, +25c 50 mhz, +100c 600 mhz, -30c 600 mhz, +25c 600 mhz, +100c 1200 mhz, -30c 1200 mhz, +25c 1200 mhz, +100c downloaded from: http:///
QPC7336 data sheet rev. e, apr 25, 2019 | subject to change without notice 8 of 13 www.qorvo.com ? evaluation board assembly drawing downloaded from: http:///
QPC7336 data sheet rev. e, apr 25, 2019 | subject to change without notice 9 of 13 www.qorvo.com ? e valuation board schematic evaluation board bill of materials (bom) ref . des ignator value , package description manuf acturer part number c1 0.7pf, c0g, 0402 chip capacitor murata, taiyo yuden c2, c9, c10 dni c4, c5 4.7nf, x7r, 0402 chip capacitor murata, taiyo yuden c6 1nf, x7r, 0402 chip capacitor murata, taiyo yuden c7 0.5pf, c0g, 0402 chip capacitor murata, taiyo yuden c8 0.2pf, c0g, 0402 chip capacitor murata, taiyo yuden l1 5.6nh, 0402 chip inductor taiyo yuden hk 1005 5n6s l2 6.8nh, 0402 chip inductor taiyo yuden hk 1005 6n8j t1 transformer minntronix 4813040r j1, j2 connector f - type, female amphenol 222181 p1 connector, 2.54mm pin spacing, optional various u1 variable equalizer q orvo QPC7336 notes: c1, l1, c2, c7, l2 and c8 may be modified in target application circuit for s11 and s22 optimizat ion t1 alternative part: mini rf mrfrx0032, s11 and s22 may show degradation downloaded from: http:///
QPC7336 data sheet rev. e, apr 25, 2019 | subject to change without notice 10 of 13 www.qorvo.com ? notes: either pin11 or pin12 can be used to set slope, internal 1:4 voltage divider between pin11 and pin12 pin configuration pin description pin no. label description 1 mode s lope control gradient (0v: positive slope control gradient or 5v: negative slope control gradient ) 2 rf in rf input signal, ac coupled 8 rf out 2 c onnection to balun and circuit output 9 rf out 1 c onnection to balun 10 fg floating ground, connection to balun 11 vc2 control v oltage 2 12 vc control v oltage 13, gnd gnd ground 14 vdd +5v supply voltage 3, 4, 5, 6, 7 n.c. not connected rf in gnd 2 1 3 10 8 9 4 6 5 7 14 12 13 11 gnd vc mode vc2 vdd n.c. n.c. n.c. rf out 2 rf out 1 fg top view n.c. n.c. downloaded from: http:///
QPC7336 data sheet rev. e, apr 25, 2019 | subject to change without notice 11 of 13 www.qorvo.com ? package outline drawing ( dimensions in millimeters) notes: 1. dimension and tolerance formats conform to asme y14. 5m- 1994. 2. the terminal #1 identifier and terminal numbering conform to jesd 95 - 1 spp - 012. 3. co - planarity applies to the exposed ground/thermal pad as well as the contact pins. 4. package body length/width does not include plastic flash protrusion across mold parting line. downloaded from: http:///
QPC7336 data sheet rev. e, apr 25, 2019 | subject to change without notice 12 of 13 www.qorvo.com ? pcb metal land pattern (dimensions in millimeters) notes: 1. all dimensions are in millimeters. angles are in degrees. 2. use 2 oz. copper minimum for top and bottom layer metal. 3. vias are required under the backside paddle of this device for proper rf/dc grounding and thermal dissipation. we rec ommend a 0.3 5mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25mm (0.10?). 4. ensure good package backside paddle solder attach for reliable operation and best electrical performance. downloaded from: http:///
QPC7336 data sheet rev. e, apr 25, 2019 | subject to change without notice 13 of 13 www.qorvo.com ? handling precautions parameter rating standard caution! esd - sensitive device esd? ? ?human body model (hbm) 1c ansi/esd/jedec js - 001 - 2012 esd? ? ?charged device model (cdm) c3 jedec jesd22 - c101f msl? ? ?moisture sensitivity level level 3 ipc/jedec j - std - 020 solderability compatible with both lead - free (260c max. reflow temp.) and tin/lead (245c max. reflow temp.) soldering proces ses. solder profiles available upon request. contact plating: enepig ( nipdau ) rohs compliance this part is compliant with 2011/65/eu rohs directive (restrictions on the use of certain hazardous substan ces in electr ical and electronic equipment) as amended by directive 2015/863/eu . this product also has the following attributes: ? halogen free (chlorine, bromine) ? antimony free ? tbbp - a (c 15 h 12 br 4 o 2 ) free ? pfos free ? svhc free contact information for the latest specifications, additional product information, worldwide sales and distribution locations: web: www.qorvo.com tel: 1- 844 - 890 - 8163 email: customer.support@qorvo.com important notice the information contained herein is believed to be reliable; however, qorvo makes no warranties regarding the i nformation con tained herein and assumes no responsibility or liability whatsoever for the use of the information cont ained herein. all informatio n contained herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for qorvo products. the information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to s uch information itself or anythin g described by such information. this information does not constitute a warranty with respect to t he products described herein, and qorvo hereby disclaims any and all warranties with resp ect to such products whether express or implied by law, course of dealing, course of performance, usage of trade or otherwise, including the implied warranties of merc hantability and fitness for a particular purpose. without limiting the generality of the foregoing, qorvo products are not warr anted or authorized for use as critical componen ts in medical, life - saving, or life - sustaining applications, or other application s where a failure would reasonably be expected to cause severe personal injury or death. copyright 201 9 ? qorvo, inc. | qorvo is a registered trademark of qorvo, inc. downloaded from: http:///

▲Up To Search▲

Price & Availability of QPC7336

	To Download QPC7336 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .